2007 - Auto Reconditioning - Paintless Dent Removal - Bumper Scratch Repair | Auto Reconditioning – Paintless Dent Removal – Bumper Scratch Repair

Archive for 2007

South New Jersey Mobile Paintless Dent Repair / PDR Removal

Johnny Dents Craigslist Ad
Johnny Dents offers professional mobile paintless dent repair and door ding removal to South New Jersey including Cherry hill, Turnersville, swell, Mt.laurel, burlington, Princeton, Hamilton square and Philadelphia.

Johnny Dents is one of the most passionate PDR companies around. He’ll never say no to a challenge. Before you bring your vehicle to a pricey and time consuming body shop, give Johnny Dents a call first. He just may save you an insurance claim and save your vehicle’s original finish and resale value.

Did you know? Once you make a claim to your insurance, your vehicle is reported to “carfax” which then informs any future buyer about your vehicle history – including accidents. With paintless dent removal, there is no insurance involved, no reports, no painting, no waiting and no hassle. It’s a win, win situation.

Call Johnny Dents today at 1.877.350.DENT (3368) or visit their official website for more info.

If you are not in this area and need a PDR company in your local area, please visit ReconExpress.com

Philadelphia Mobile Auto Paintless Dent Repair (PDR) Ding Removal

Philadelphia’s most complete and professional mobile paintless dent repair and door ding removal Company. Introducing Johnny Dents. From door dings to complex dents, you’ll benefit time saving and cost-effective results with Johnny Dents.

Johnny Dents offers professional and mobile service to your home or office. Most dings and dents are removed within 30-60 minutes and are completed to you satisfaction.

The benefits of PDR are:

-Most repairs are lower than your deductible
-No need to leave your vehicle – He’s Mobile!
-Instantly retain your original finish.
-No paint or fillers needed.
-Guaranteed removal or no charge applied.

In conclusion, you vehicle will be restored back to factory while sustaining your vehicle’s resale value. PDR is the fastest, most efficient and cost effective method for removing dings and dents without using paint or fillers.

Call Johnny Dents today at 1.877.350.DENT (3368)

To find a local PDR company in your area, please visit ReconExpress.com

Crowns & Pressure Releasing – Paintless Dent Repair PDR Training Removal

Crowns & Highs – Paintless Dent Repair / Removal Training (PDR)

Crown Removal

Crowns and pressure releasing is one of the most important factors to understand and learn about paintless dent repair. It is also the most overlooked lesson during a trainee’s learning experience. Mainly due to not enough time during PDR training.

We show an introduction page from our Basic Line Board Manual regarding crowns. Not a whole lot to show but enough that you can tell what a crown looks like through our eyes and the line reflection. Our PDR training goes into depth about “identification.” If you can’t see it, how are you going to remove a dent completely?

In most cases, PDR techs who are not aware of crowns or simply don’t see them, end up forcing a dent to come out. Unfortunately, that won’t work. Instead the results are either a wave still visible or unwanted push marks. Identifying crowns and releasing pressure creates a smoother and faster repair which eliminates forcing a repair.

You must understand a dent wants to go back to its original shape. You just need to know why, how and where. Moving the board in different angles is one key but the details that are surrounding it is what puts it all together.

Our one-on-one PDR training explains in detail why you are missing what you’re not seeing. If you are already a veteran PDR tech, you may want to purchase the Basic Line Board Manual before taking advanced training? Although again, there is no substitution for personal and one-on-one PDR training.

Our pdr manual is designed to give you more insight which can make all of a world of difference. If you have any questions regarding PDR training or the Line Board Manual, please visit denttime.com

San Francisco Bay Area – Mobile Paintless Dent Repair / Removal

Dent Crew of San Francisco Bay Area mobile paintless dent repair / removal (PDR) offers high quality results at affordable prices.

No need to take your vehicle to a collision shop if the paint has not been or severely damaged. Dent Crew comes to your home or office and usually within 30-60 minutes, your dings and dents are restored back to pre-accident condition without using paint or fillers. WATCH HOW PDR IS PERFORMED.

Need an estimate for your dings or dents? Please email Dent Crew your photos by clicking here. If you have questions about Dent Crew’s services, please contact them direct at 415-238-3090.

If you are not from San Francisco Bay Area, please visit ReconExpress.com to find a local technician near you.

Learning About Fog Reflection – Paintless Dent Repair/Removal PDR

Learning About Reflections – Paintless Dent Repair/Removal PDR

This article was written by Vince from Dents No More in Orange County, California. He’s a PDR tech who has been performing professional PDR since 1994. A “fog” reflection specialist who explains the use of his reflection.

Written By Vince from DentsNoMore.com

FOG 101

When using a fog board to repair a dent, using the paintless dent removal technique, board placement and lighting are critical. The whole purpose of using a fog board (reflection board) is to see the damage better. The board itself is usually yellow or white. The line is painted on with a flat black can of spray paint. One single line down the middle with the over spray acting as the fog. The over spray is crucial mainly because that is the fog! Not too much and not too little. The purpose of the fog is to see depth of the dent and to highlight the natural orange peel of the panel. It also helps you see the tip of your tool better, which allows better-controlled pushes. When outside, most people that use fog boards will try to have the sun behind them to light up the fog board. When inside lighted fog boards come in handy.

With a single line reflection board there are two pictures you can see inside the dent. Think: Negative and positive.

What happens is if you use the side closest to the skin of the car the dent is shaded down the middle on one side of the dent. If you shift your head and look at the reflection of the dent on the topside of the board the opposite side of the dent will be shaded. The whole purpose of this is to find the middle of the dent. Where the black and yellow meet is where the center of the dent is. Now you can start pushing. For years many skilled body men use to start on the outside of the dent and shrink the metal in towards the middle. This is not true with PDR. With our theory, by making precise pushes in the center circling out, the metal regains its strength. Layer by layer, push by push. In a crease type dent a zipper technique is used. Starting at one end and zig zagging through the dent. Once again, layer by layer. It is crucial to remember each push made effects the previous and the next push. As the dent is being removed layer by layer, the board must be moved farther and farther away. When starting out the board will be about one foot away from the dent. When finishing the dent, the board can be as much at four feet away from the dent.

Under Construction

PhotobucketOur blog is under construction. We are working hard to bring a better navigation experience. Thank you for your patience.